x
Image

WIDSON 50

WIDSON 50

WIDSON 50 is a modular jack-up platform designed for operations in port infrastructure, coastal waters, and offshore areas. The platform can be used for geotechnical surveys, dredging operations, inert material placement, drilling and blasting operations, and underwater engineering works.

Its demountable modular design allows the platform to be transported by rail, road, and sea without exceeding standard transport dimensions. The platform consists of main modules and dedicated jack-up leg modules connected by special reusable locking systems.

Year built: 2025
  • General Information
  • Principal Dimensions
  • Platform Applications
General Information
FlagRussian Federation
Year built2025
Port of registryBig Port of Saint Petersburg
Platform typeSelf-elevating floating offshore platform
ClassKE (*) R2-RSN MOP (self-elevating)
Tank Capacities
Fuel, m³diesel fuel, up to 5.5
Oil, m³3.7
Fresh water, m³5.5
Technical water, m³14.7
Drilling fluid preparation tank, m³4
Wastewater, m³2.8
Anchoring Equipment

Three 14.7 kN anchor winches; three anchors weighing 240 kg each; three steel wire ropes, 200 m each

Power System

Main power source: SB-HW4.D-50 generator, 62.5 kW, 400 V, 50 Hz

Emergency power source: 18 rechargeable batteries rated at 12 V and 200 Ah, providing power to all essential platform systems for 18 hours.

Hydraulic power unit: eight double-acting hydraulic cylinders with a stroke of 1,200 mm, an operating pressure of 20 MPa, and a total lifting capacity of 225 tonnes.

Safety and Fire Protection

The platform is equipped with modern fire-protection systems and occupational safety equipment that comply with Russian and international regulations.

The life-saving, radio, navigation, and signalling equipment fully complies with the Rules of the Russian Maritime Register of Shipping, the 2009 MODU Code, and the 1972 International Regulations for Preventing Collisions at Sea (COLREGs).

Additional Equipment
  • Accommodation module based on a standard 20-foot container

Our approach —
engineering for real-world challenges

We develop modular solutions for the construction, modernisation, and operation of hydraulic engineering facilities. We design platforms and infrastructure for specific operating conditions and customer requirements.

Have questions? Submit a request and we will contact you.

Submit a Request

Submit a request, and we will contact you to provide a consultation.